Chennai, Tamil Nadu, India +91 63553 47710 [email protected]
GSTIN: 33AMOPL8016F1Z2
Engineering Product Portfolio

Power, Filtration & Mechanical Systems

From industrial power generator sets to high-efficiency filtration, marine propulsion hardware, and precision boost systems backed by our Chennai facility.

1. Diesel Generators & Power Systems

High-efficiency prime and emergency standby power generation units ranging from 30 kVA to 1500 kVA.

Industrial Prime Power Generator Set Power Generation

Heavy-Duty Prime Gensets

Continuous-duty prime power generator units equipped with electronic speed governing, 4-pole brushless alternators, and multi-stage vibration damping mounts.

Rating: 250 kVA - 1500 kVA Voltage: 415V, 3-Phase, 50 Hz Duty: 24/7 Continuous Prime Operation
Standby Emergency Diesel Genset with Acoustic Canopy Acoustic Canopy

Standby & Utility Power Units

Fast-starting emergency standby diesel generator sets configured with automated mains failure (AMF) control panels and sound-attenuated acoustic weather enclosures.

Rating: 30 kVA - 200 kVA Enclosure: Sound-Attenuated Weatherproof Canopy Response: Step-load acceptance in < 10 seconds
Open Skid Generator Set & Brushless Alternator Open Skids

Open-Skid Industrial Generators

Heavy-duty synchronous AC generator units with digital automatic voltage regulators (AVR), 12-lead reconnectable stators, and Class-H insulation protection.

Harmonics: Total harmonic distortion < 2.5% Excitation: Self-excited / PMG auxiliary option Protection: IP23 enclosure rating

2. Industrial Filtration Systems

High-capacity fuel, lube, air, and hydraulic purification systems designed to safeguard engine internals from severe wear.

Dual Stage Fuel Water Separator Filter Fuel Filtration

Dual-Stage Fuel Water Separators

Heavy-duty primary fuel filtration units featuring hydrophobic coalescing media, transparent sediment drain bowls, and integrated water-in-fuel (WIF) sensor ports.

Efficiency: 99% free and emulsified water separation Micron Rating: 10 / 30 Micron staged Flow Rate: 150 - 600 Liters/Hour
Heavy Duty Lube Oil Filter Lube Filtration

High-Flow Lube Oil Filters

Full-flow and combination bypass lubrication filters constructed with synthetic microglass media to capture soot, carbon deposits, and sub-micron abrasive particles.

Media: Multi-layer synthetic microglass Burst Pressure: Tested to 35 Bar hydrostatic Benefit: Prolongs engine bearing and liner life
Radial Seal Air Cleaner Filters Air Filtration

Radial Seal Heavy Air Cleaners

High-volume cylindrical air filter elements featuring urethane radial seals and embossed pleated media to resist element pinch under high intake vacuum.

Dust Capacity: High holding capacity for severe dust Efficiency: 99.9% ISO 5011 particulate capture Seal: Molded flexible urethane endcaps

3. Marine Propulsion & Auxiliary Power

Corrosion-resistant marine diesel engine systems, heat exchangers, and marine auxiliary generator assemblies.

Commercial Vessel Twin Marine Propulsion System Twin Propulsion

Commercial Twin-Propulsion Systems

Commercial vessel dual marine propulsion systems engineered for long-haul duty, twin-bank synchronization, and water-jacketed high-performance exhaust runs.

Configuration: Synchronized Twin-Shaft Propulsion Vessels: Commercial trawlers, offshore tugs, crew boats Monitoring: Dual electronic helm instrumentation
Next-Gen V12 Commercial Marine Propulsion Engine V12 Marine

Next-Gen V12 Marine Power Units

High-displacement V12 marine diesel power units delivering peak torque across mid-range cruise RPMs with compact engine footprint and front auxiliary PTO drive.

Architecture: Heavy-Duty V12 Cylinder Block Power Band: High continuous bollard-pull torque Auxiliary: Front power take-off (PTO) option
Marine Intercooler & Charge Air System Charge Air Cooling

Marine Intercooled Charge-Air Systems

Integrated seawater-to-air charge coolers, high-capacity intake filtration, and precision valve gear engineered for continuous high-boost marine operation.

Core: High-efficiency marine charge air bundle Cooling: Raw seawater indirect heat rejection Efficiency: Substantially lowered cylinder thermal loads
Skid-Mounted Commercial Marine Diesel Engine Propulsion Skids

Skid-Mounted Marine Power Assemblies

Pre-engineered marine propulsion engines on structural foundation frames with twin water-cooled turbochargers, isolation mounts, and dual spin-on lube filters.

Mounting: Heavy vibration-isolated marine bedframe Boost: Water-jacketed marine turbocharger pair Filtration: Duplex spin-on lube and fuel filtration
Marine Cylinder Bank & Air Filtration System Marine Auxiliary

Marine Auxiliary & Generator Power

Continuous-duty marine auxiliary drive units equipped with thermal-lagged exhaust manifolds, marine canister air filtration, and accessible service points.

Exhaust: Certified thermal insulation lagging Intake: High-velocity marine canister filters Duty: 24/7 commercial auxiliary generation
Marine Tube and Shell Heat Exchanger Heat Exchangers

Cupro-Nickel Marine Heat Exchangers

Heavy-duty marine tube-and-shell heat exchangers designed for raw sea water cooling of engine jacket water and marine transmission lube oil.

Tubes: 90/10 Cupro-Nickel sea water resistant Shell: Heavy-gauge bronze / cast iron Cleaning: Removable endcovers for easy rod-out

4. Precision Mechanical Components & Overhauls

Engine overhaul kits, multi-layer steel gaskets, fuel delivery pumps, and precision machined engine assemblies.

Multi Layer Steel Cylinder Head Gasket Sealing Systems

MLS Cylinder Head Gasket Kits

Multi-Layer Steel (MLS) cylinder head gaskets engineered to withstand extreme peak cylinder pressures, combustion gas temperatures, and thermal expansion cycles.

Layers: 3 to 5 Spring Steel Layers with FKM Coating Pressure: Extreme cylinder combustion sealing Tolerances: Micron-accurate bore and fluid ports
Engine Long-Block & Water Pump Assembly Cooling Assemblies

Heavy-Duty Engine Water Pumps

Cast iron coolant circulating pumps with unitized ceramic mechanical seals, precision-machined impellers, and heavy-duty sealed roller bearings.

Housing: High-grade grey cast iron Shaft: Case-hardened alloy steel Flow: High-volume continuous circulation
High Pressure Fuel Injection Lines & Injectors Fuel Delivery

Precision Fuel Injection Hardware

High-pressure seamless steel fuel injection lines, nozzle assemblies, and delivery check valves calibrated for precise injection timing and spray atomization.

Pressure: Rated for up to 2000 Bar common rail Tubing: Cold-drawn seamless thick-wall steel Fittings: High-tensile forged union nuts

5. Industrial Turbochargers & Balanced Cores

High-efficiency turbochargers and micro-balanced CHRA cartridges engineered as an integral part of our powertrain boost systems.

Industrial Continuous Duty Turbocharger Turbochargers

Industrial Continuous-Duty Turbos

Full turbocharger assemblies calibrated for industrial generators, process compressors, and heavy machinery requiring high steady-state boost pressure.

Wheel: Inconel 713C turbine rotor Actuation: Calibrated wastegate / electronic Housing: Ductile iron heat-resistant alloy
VSR Balanced CHRA Cartridge CHRA Cartridges

Balanced CHRA Core Cartridges

Complete center section cartridge assemblies. Pre-balanced on high-speed VSR test benches up to 250,000 RPM for instant drop-in installation.

RPM Test: Up to 250,000 RPM dynamic verification Vibration: Residual unbalance < 0.5g Seals: Heavy-duty step gap piston rings
Smart Electronic Boost Actuator & Wastegate Controls & Actuators

Digital Electronic Actuators

Smart electronic stepper motor actuators with position sensor feedback for digital engine management systems and precise boost curve tracking.

Control: CAN-bus / PWM digital interface Calibration: Pre-calibrated stroke and endstops Testing: Cycle tested for 1,000,000 actuations